VapeOnly vCat Starter Kit with Cats Eye Atomizer - Black/Silver 650mAh

VapeOnly vCat Starter Kit comes with two different colors e-cigarettes. vCat cartomizer, assembled with a water-drop shape removable mouthpiece, has a pyrex glass tube with metal cover outside. Dedicated 650mAh/1100mAh battery in it ensures you stable and optimum performance.

Size of 650mAh Battery: 84.6mm x 14.0mm (Length x Diameter)
Size of 1100mAh Battery: 109mm x 14.0mm (Length x Diameter)
Size of cCartomizer: 67.6 x 14.0mm (Length x Diameter)
Working voltage: 3.3V-4.2V
Maximum current: 3.5A
Battery capacity: 650mAh/1100mAh
Coil resistance: 1.8ohm Atomizer
capacity: 1.5ml
Materials: stainless steel, copper hardware, glass, rubber seal components

• Transparent “cat's eye” window design
• Pyrex glass cartomizer with metal cover protection
• Patented button with power level indicator
• Full voltage output
• Short circuit protection
• Battery protection
• VapeOnly vAir D16 Replaceable Dual Coil Unit

650mAh Kit
• 2 x vCat Cartomizer
• 2 x vCat 650mAh Manual Battery(1pc silver +1 pc black/blue/green/purple/red )
• 7 x Replacement Coils, 2 pcs pre-installed in the cartomziers
• 1 x USB Charger
• 1 x AC-USB Adapter
• 1 x Manual (English)

1100mAh Kit
• 2 x vCat Cartomizer
• 2 x vCat 1100mAh Manual Battery(1pc silver +1 pc black/blue/green/purple/red )
• 7 x Replacement Coils, 2 pcs pre-installed in the cartomziers
• 1 x USB Charger
• 1 x AC-USB Adapter
• 1 x Manual (English)

How to refill the cartomizer
Hold the connector base and screw off the cartomizer form the battery. - Turn upside down the cartomizer.
Screw off the connector base and fill in no more than 1.5ml e-liquid.
Carefully screw on the base connector (coil unit loaded) and clear surplus liquid.
Wait 1-2 minutes for the e-liquid to feed into the coil before you start vaping. Or Give the cartomizer a quick shake to make it faster.
Screw onto your battery and start vaping.

How to change replacement coil
Turn upside down the atomizer and screw off the bottom base.
Disconnect the old coil unit from the bottom base, replace with a new one.
Screw the base back to the tube tightly.

Usage of vCat 650mAh Manual Battery
The vCat 650mAh Manual Battery fits both eGo and 510 threaded cartomizers.
Five-click lock: Five quick clicks of the button will activate the battery. Another five clicks will inactivate it. LED blinks after when it’s activated or locked.
Patented button with power level indicator: >3.9V, green LED indicator;3.6V-3.9V, blue LED indicator; <3.6V, red LED indicator.

Charging
Simply connect the battery to a standard USB output port through the USB chargerto charge the battery. LED light will blink 5 times to indicate it starts charging. While charging, it shows green LED if battery voltage is above 4.15V, and shows red if below 4.15V. It takes about 2.5 hours for a full charge.

• It does not come with e-liquid.
• There is CE mark on the battery's thread.